Skip to main content

Amazon Seller Partner

Availability
Available CloudAvailable Self-Managed CommunityAvailable Self-Managed EnterpriseAvailable PyAirbyte
Support Level
Airbyte Connector
Connector Version
4.6.2 (last updated 5 days ago)
CDK Version
6.36.2
Sync Success Rate
Usage Rate

This page contains the setup guide and reference information for the Amazon Seller Partner source connector.

Prerequisites​

  • Amazon Seller Partner account

For Airbyte Cloud:

  • AWS Environment
  • AWS Region
  • AWS Seller Partner Account Type
  • Granted OAuth access

For Airbyte Open Source:

  • AWS Environment
  • AWS Region
  • AWS Seller Partner Account Type
  • LWA Client Id
  • LWA Client Secret
  • Refresh Token

Setup guide​

Step 1: Set up Amazon Seller Partner​

Register your Amazon Seller Partner account.

Airbyte Open Source setup steps

  • Register Amazon Seller Partner application. The application must be published as Amazon does not allow external parties such as Airbyte to access draft applications.

Step 2: Set up the source connector in Airbyte​

To pass the check for Seller and Vendor accounts, you must have access to the Orders endpoint and the Vendor Orders endpoint, respectively.

For Airbyte Cloud:​

  1. Log into your Airbyte Cloud account.
  2. Click Sources and then click + New source.
  3. On the Set up the source page, select Amazon Seller Partner from the Source type dropdown.
  4. Enter a name for the Amazon Seller Partner connector.
  5. Click Authenticate your account.
  6. Log in and Authorize to your Amazon Seller Partner account.
  7. For Start Date, enter the date in YYYY-MM-DD format. The data added on and after this date will be replicated. This field is optional - if not provided or older than 2 years ago from today, the date 2 years ago from today will be used.
  8. For End Date, enter the date in YYYY-MM-DD format. Any data after this date will not be replicated. This field is optional - if not provided, today's date will be used.
  9. Financial Events Step Size: Select the time window size for fetching financial events data. Options (in days) include:
    • 1
    • 7
    • 14
    • 30
    • 60
    • 90
    • 180 (default)
  10. You can specify report options for each stream using Report Options section. Available options can be found in corresponding category here.
  11. For Wait between requests to avoid fatal statuses in reports, enable if you want to use wating time between requests to avoid fatal statuses in report based streams.
  12. Click Set up source.

For Airbyte Open Source:​

  1. Navigate to the Airbyte Open Source dashboard.
  2. On the Set up the source page, select Amazon Seller Partner from the Source type dropdown.
  3. Enter a name for the Amazon Seller Partner connector.
  4. Using developer application from Step 1, generate refresh token.
  5. For Start Date, enter the date in YYYY-MM-DD format. The data added on and after this date will be replicated. This field is optional - if not provided, the date 2 years ago from today will be used.
  6. For End Date, enter the date in YYYY-MM-DD format. Any data after this date will not be replicated. This field is optional - if not provided, today's date will be used.
  7. Financial Events Step Size: Select the time window size for fetching financial events data. Options include (in days):
    • 1
    • 7
    • 14
    • 30
    • 60
    • 90
    • 180 (default)
  8. You can specify report options for each stream using Report Options section. Available options can be found in corresponding category here.
  9. For Wait between requests to avoid fatal statuses in reports, enable if you want to use wating time between requests to avoid fatal statuses in report based streams.
  10. Click Set up source.

Supported sync modes​

The Amazon Seller Partner source connector supports the following sync modes:

  • Full Refresh
  • Incremental

Supported Streams​

Entity-Relationship Diagram (ERD)​

Report options​

Report options can be assigned on a per-stream basis that alter the behavior when generating a report. For the full list, refer to Amazon’s report type values documentation.

Certain report types have required parameters that must be defined. For the GET_FLAT_FILE_ALL_ORDERS_DATA_BY_ORDER_DATE_GENERAL, GET_AMAZON_FULFILLED_SHIPMENTS_DATA_GENERAL, and GET_FLAT_FILE_RETURNS_DATA_BY_RETURN_DATE streams, the maximum allowable value for period_in_days is 30 days, 30 days, and 60 days, respectively. If the specified period_in_days exceeds these limits, it will be automatically adjusted to the maximum value for the respective stream, or set to 365 days if not provided.

For the Vendor Forecasting Report, we have two streams - GET_VENDOR_FORECASTING_FRESH_REPORT and GET_VENDOR_FORECASTING_RETAIL_REPORT which use the same GET_VENDOR_FORECASTING_REPORT Amazon's report, but with different options for the sellingProgram parameter - FRESH and RETAIL respectively.

Performance considerations​

Information about rate limits you may find here.

  • Use the Financial Events Step Size configuration:
    • Smaller step sizes (e.g., P1D or 1 day) are ideal for large data volumes to avoid timeouts and reduce the risk of hitting rate limits.
    • Larger step sizes (e.g., P14D or 14 days) are more efficient for smaller data volumes, reducing the number of API calls.

Data type map​

Integration TypeAirbyte Type
stringstring
int, float, numbernumber
datedate
datetimedatetime
arrayarray
objectobject

Limitations & Troubleshooting​

Failed to retrieve the report​

Failed to retrieve the report 'YOUR_REPORT_NAME' for period 2024-01-01T12:01:15Z-2024-01-15T12:01:14Z. 
This will be read during the next sync. Report ID: YOUR_REPORT_ID. Error: Failed to retrieve the report result document.

Requesting reports via Amazon Seller Partner API can lead to failed syncs with error above "Failed to retrieve the report...".

One of the reasons why users face this issue is that report requests were made too often.

Solution 1:

To overcome it you can force use sleeping between requests to avoid fatal statuses while requesting reports.

Steps:

  1. Go to the Set Up page of the connector.
  2. Open optional section.
  3. Enable Wait between requests to avoid fatal statuses in reports toggle.

Disadvantages of this approach is that syncs with waiting between requests are much slower than without it. So it is better to create a separate connection only for stream that usually fails with "Failed to retrieve the report..." error. This will help you to avoid affecting streams that worked as expected.

note

For now the waiting logic only work for the following streams:

  • GET_AMAZON_FULFILLED_SHIPMENTS_DATA_GENERAL
  • GET_AFN_INVENTORY_DATA
  • GET_FBA_ESTIMATED_FBA_FEES_TXT_DATA

Solution 2:

Create a separate connection for streams which usually fail with error above "Failed to retrieve the report..." and disable sync of these streams in the first connection with streams which don't fail because of the error. Adjust the sync time of these two connection to do not overlap. It's recommended to have a time break between syncs in the connections.

Reference​

Config fields reference

Field
Type
Property name
string
aws_environment
string
region
string
account_type
string
lwa_app_id
string
lwa_client_secret
string
refresh_token
Auth Type
"oauth2.0"
auth_type
string
app_id
string
replication_start_date
string
replication_end_date
integer
period_in_days
array<object>
report_options_list
boolean
wait_to_avoid_fatal_errors
string
financial_events_step

Changelog​

Expand to review
VersionDatePull RequestSubject

| 4.6.2 | 2025-04-09 | 57537 |Fix Extend Minimum Date Range| | 4.6.1 | 2025-04-08 | 55238 |Fix daterange in DatetimeBasedCursor and Added configurable step size for financial events streams (list_financial_event_groups, list_financial_events)| | 4.6.0 | 2025-02-24 | 53225 | Add API Budget | | 4.5.3 | 2025-02-22 | 53928 | Update dependencies | | 4.5.2 | 2025-02-17 | 53693 | Add app_id to server configuration (OAuth) | | 4.5.1 | 2025-02-08 | 49297 | Update dependencies | | 4.5.0 | 2025-02-04 | 53155 | Promoting release candidate 4.5.0-rc.5 to a main version. | | 4.5.0-rc.5 | 2025-01-31 | 52700 | Use incremental_dependency for the OrderItems substream | | 4.5.0-rc.4 | 2025-01-31 | 52683 | Fix Rate Limiting issue; disable concurrency | | 4.5.0-rc.3 | 2025-01-28 | 52619 | Fix Orders pagination | | 4.5.0-rc.2 | 2025-01-28 | 52592 | Only request data for the Orders stream for up to 2 minutes before present if replication_start_date is not specified | | 4.5.0-rc.1 | 2025-01-27 | 49293 | Convert to REST and reports streams to concurrent low-code CDK in v6. Remove buggy analytics streams | | 4.4.7 | 2024-11-14 | 47691 | Fix period_in_days definition | | 4.4.6 | 2024-11-25 | 48644 | Starting with this version, the Docker image is now rootless. Please note that this and future versions will not be compatible with Airbyte versions earlier than 0.64 | | 4.4.5 | 2024-11-04 | 47049 | Update dependencies | | 4.4.4 | 2024-10-12 | 46817 | Update dependencies | | 4.4.3 | 2024-10-05 | 46473 | Update dependencies | | 4.4.2 | 2024-09-28 | 44748 | Update dependencies | | 4.4.1 | 2024-08-17 | 43739 | Update dependencies | | 4.4.0 | 2024-07-17 | 42052 | Add waiting between requests logic to avoid failed report requests | | 4.3.11 | 2024-07-13 | 41873 | Update dependencies | | 4.3.10 | 2024-07-10 | 41345 | Update dependencies | | 4.3.9 | 2024-07-09 | 41158 | Update dependencies | | 4.3.8 | 2024-07-08 | 40751 | Improve error messaging and turning on alerting | | 4.3.7 | 2024-07-06 | 40990 | Update dependencies | | 4.3.6 | 2024-07-01 | 40590 | Add log message when data only accessible to seller accounts, add report id in log message for fatal report status, add check for start date. | | 4.3.5 | 2024-06-27 | 40215 | Replaced deprecated AirbyteLogger with logging.Logger | | 4.3.4 | 2024-06-25 | 40384 | Update dependencies | | 4.3.3 | 2024-06-22 | 40008 | Update dependencies | | 4.3.2 | 2024-06-13 | 39441 | Update state handling for incremental streams | | 4.3.1 | 2024-06-04 | 38969 | [autopull] Upgrade base image to v1.2.1 | | 4.3.0 | 2024-05-24 | #38657 | Extend the report_options spec config with a stream_name attribute | | 4.2.4 | 2024-05-15 | #38210 | Fix GET_VENDOR_TRAFFIC_REPORT stream with report option reportPeriod=DAY | | 4.2.3 | 2024-05-09 | #38078 | Hide OSS-only streams in report options config for cloud users | | 4.2.2 | 2024-04-24 | #36630 | Schema descriptions and CDK 0.80.0 | | 4.2.1 | 2024-04-08 | #36895 | Fix reportPeriod day query params | | 4.2.0 | 2024-03-19 | #36267 | Pin airbyte-cdk version to ^0 | | 4.1.0 | 2024-03-12 | #35954 | Add GET_VENDOR_FORECASTING_FRESH_REPORT and GET_VENDOR_FORECASTING_RETAIL_REPORT streams | | 4.0.0 | 2024-02-23 | #35439 | Update schema for the GET_FBA_STORAGE_FEE_CHARGES_DATA stream | | 3.5.0 | 2024-02-09 | #35331 | Fix check for Vendor accounts. Add failed report result message | | 3.4.0 | 2024-02-15 | #35273 | Add VendorOrders stream | | 3.3.2 | 2024-02-13 | #33996 | Add integration tests | | 3.3.1 | 2024-02-09 | #35106 | Add logs for the failed check command | | 3.3.0 | 2024-02-09 | #35062 | Fix the check command for the Vendor account type | | 3.2.2 | 2024-02-07 | #34914 | Fix date formatting for ledger reports with aggregation by month | | 3.2.1 | 2024-01-30 | #34654 | Fix date format in state message for streams with custom dates formatting | | 3.2.0 | 2024-01-26 | #34549 | Update schemas for vendor analytics streams | | 3.1.0 | 2024-01-17 | #34283 | Delete deprecated streams | | 3.0.1 | 2023-12-22 | #33741 | Improve report streams performance | | 3.0.0 | 2023-12-12 | #32977 | Make all streams incremental | | 2.5.0 | 2023-11-27 | #32505 | Make report options configurable via UI | | 2.4.0 | 2023-11-23 | #32738 | Add GET_VENDOR_NET_PURE_PRODUCT_MARGIN_REPORT, GET_VENDOR_REAL_TIME_INVENTORY_REPORT, and GET_VENDOR_TRAFFIC_REPORT streams | | 2.3.0 | 2023-11-22 | #32541 | Make GET_AFN_INVENTORY_DATA, GET_AFN_INVENTORY_DATA_BY_COUNTRY, and GET_V2_SETTLEMENT_REPORT_DATA_FLAT_FILE streams incremental | | 2.2.0 | 2023-11-21 | #32639 | Make start date optional, if start date is not provided, date 2 years ago from today will be used | | 2.1.1 | 2023-11-21 | #32560 | Silently exit sync if the retry attempts were unsuccessful | | 2.1.0 | 2023-11-21 | #32591 | Add new fields to GET_LEDGER_DETAIL_VIEW_DATA, GET_FBA_INVENTORY_PLANNING_DATA and Orders schemas | | 2.0.2 | 2023-11-17 | #32462 | Remove Max time option from specification; set default waiting time for reports to 1 hour | | 2.0.1 | 2023-11-16 | #32550 | Fix the OAuth flow | | 2.0.0 | 2023-11-23 | #32355 | Remove Brand Analytics from Airbyte Cloud, permanently remove deprecated FBA reports | | 1.6.2 | 2023-11-14 | #32508 | Do not use AWS signature as it is no longer required by the Amazon API | | 1.6.1 | 2023-11-13 | #32457 | Fix report decompression | | 1.6.0 | 2023-11-09 | #32259 | Mark "aws_secret_key" and "aws_access_key" as required in specification; update schema for stream Orders | | 1.5.1 | 2023-08-18 | #29255 | Field role_arn is optional on UI but not really on the backend blocking connector set up using oauth | | 1.5.0 | 2023-08-08 | #29054 | Add new stream OrderItems | | 1.4.1 | 2023-07-25 | #27050 | Fix - non vendor accounts connector create/check issue | | 1.4.0 | 2023-07-21 | #27110 | Add GET_FLAT_FILE_ACTIONABLE_ORDER_DATA_SHIPPING and GET_ORDER_REPORT_DATA_SHIPPING streams | | 1.3.0 | 2023-06-09 | #27110 | Removed app_id from InputConfiguration, refactored spec | | 1.2.0 | 2023-05-23 | #22503 | Enabled stream attribute customization from Source configuration | | 1.1.0 | 2023-04-21 | #23605 | Add FBA Reimbursement Report stream | | 1.0.1 | 2023-03-15 | #24098 | Add Belgium Marketplace | | 1.0.0 | 2023-03-13 | #23980 | Make app_id required. Increase end_date gap up to 5 minutes from now for Finance streams. Fix connection check failure when trying to connect to Amazon Vendor Central accounts | | 0.2.33 | 2023-03-01 | #23606 | Implement reportOptions for all missing reports and refactor | | 0.2.32 | 2022-02-21 | #23300 | Make AWS Access Key, AWS Secret Access and Role ARN optional | | 0.2.31 | 2022-01-10 | #16430 | Implement slicing for report streams | | 0.2.30 | 2022-12-28 | #20896 | Validate connections without orders data | | 0.2.29 | 2022-11-18 | #19581 | Use user provided end date for GET_SALES_AND_TRAFFIC_REPORT | | 0.2.28 | 2022-10-20 | #18283 | Added multiple (22) report types | | 0.2.26 | 2022-09-24 | #16629 | Report API version to 2021-06-30, added multiple (5) report types | | 0.2.25 | 2022-07-27 | #15063 | Add Restock Inventory Report | | 0.2.24 | 2022-07-12 | #14625 | Add FBA Storage Fees Report | | 0.2.23 | 2022-06-08 | #13604 | Add new streams: Fullfiments returns and Settlement reports | | 0.2.22 | 2022-06-15 | #13633 | Fix - handle start date for financial stream | | 0.2.21 | 2022-06-01 | #13364 | Add financial streams | | 0.2.20 | 2022-05-30 | #13059 | Add replication end date to config | | 0.2.19 | 2022-05-24 | #13119 | Add OAuth2.0 support | | 0.2.18 | 2022-05-06 | #12663 | Add GET_XML_BROWSE_TREE_DATA report | | 0.2.17 | 2022-05-19 | #12946 | Add throttling exception managing in Orders streams | | 0.2.16 | 2022-05-04 | #12523 | Allow to use IAM user arn or IAM role | | 0.2.15 | 2022-01-25 | #9789 | Add stream FbaReplacementsReports | | 0.2.14 | 2022-01-19 | #9621 | Add GET_FLAT_FILE_ALL_ORDERS_DATA_BY_LAST_UPDATE_GENERAL report | | 0.2.13 | 2022-01-18 | #9581 | Change createdSince parameter to dataStartTime | | 0.2.12 | 2022-01-05 | #9312 | Add all remaining brand analytics report streams | | 0.2.11 | 2022-01-05 | #9115 | Fix reading only 100 orders | | 0.2.10 | 2021-12-31 | #9236 | Fix NoAuth deprecation warning | | 0.2.9 | 2021-12-30 | #9212 | Normalize GET_SELLER_FEEDBACK_DATA header field names | | 0.2.8 | 2021-12-22 | #8810 | Fix GET_SELLER_FEEDBACK_DATA Date cursor field format | | 0.2.7 | 2021-12-21 | #9002 | Extract REPORTS_MAX_WAIT_SECONDS to configurable parameter | | 0.2.6 | 2021-12-10 | #8179 | Add GET_BRAND_ANALYTICS_SEARCH_TERMS_REPORT report | | 0.2.5 | 2021-12-06 | #8425 | Update title, description fields in spec | | 0.2.4 | 2021-11-08 | #8021 | Added GET_SELLER_FEEDBACK_DATA report with incremental sync capability | | 0.2.3 | 2021-11-08 | #7828 | Remove datetime format from all streams | | 0.2.2 | 2021-11-08 | #7752 | Change check_connection function to use stream Orders | | 0.2.1 | 2021-09-17 | #5248 | Added extra stream support. Updated reports streams logics | | 0.2.0 | 2021-08-06 | #4863 | Rebuild source with airbyte-cdk | | 0.1.3 | 2021-06-23 | #4288 | Bugfix failing connection check | | 0.1.2 | 2021-06-15 | #4108 | Fixed: Sync fails with timeout when create report is CANCELLED` |

Was this page helpful?